在塑料和橡胶工业中的应用：
Applications in Plastics and Rubber Industry:

塑料注模成型通常要求：高温料和低温模。同机状况下必须采用隔热方法。保持注模低温同时不能使注塑机温度过高。在注模与注机之间安装Frathernit绝缘板就能满足这一要求。
Plastics injection moulding usually means: Hot liquid and cold mould. Both in one machine need a thermal insulation. Keep the mould cold enough and make sure the machine will not be too hot. Frathernit Insulation boards mounted between moulds and machine can guarantee that.

优点Advantages：

● 缩短生产周期，提高生产率。
● Shorten the production cycles and increase productivity
● 降低能耗。
● Reduce energy consumption
● 改善成品质量，连续生产工艺保证了产品质量稳定。
● Improve product quality, constant quality because of constant production process.
● 防止机器过热：无电器故障，液压系统无漏油。
● Protect machine from overheating: No electronic defects, no oil leaking in the hydraulic system.